Double Glazing Window Locks Repairs Double glazing window locks repair is essential to keep your home secure. Insecure hinges and handles can let draughts in your home, making your windows vulnerable to burglars. Fortunately, it's not difficult to repair stiff uPVC handles and locks without having to replace your door or window. In most cases, cooling or lubricating the mechanisms can help resolve any problems. Broken Glass Over time, double-glazing window locks will wear out. When this happens, the handles can become difficult to open or even lock shut. This could cause problems with air circulation in the home and can also be a security risk. It is crucial to have the window repaired as quickly as you can. Double-glazed windows are made up of two or more glass panes that have gas in between them to provide insulation. Seals also hold the panes together. The presence of condensation between the glass panes can be an indication that there is an issue with one of these seals, which needs to be replaced. It is usually necessary to replace just the one window pane and is cheaper than replacing the entire window. double glazing window repairs -up seal inside windows with double glazing usually causes cloudiness and condensation. This could be due to a variety of causes, including air leaks or excess moisture in the home. It is important to call an expert in double glazing to fix the gas and seal your double-glazed window immediately you notice this problem. It is possible to replace a single pane of double glazing glass however, it is not advised to do it without the help of an expert. This is because it requires specialized tools and the right expertise to perform the task safely. Doing it yourself could cause damage to the window's frame, or even to your personal health. A lot of people use a crowbar in order to open their double-glazed windows when it's stuck but it will typically leave the window frame bruised and dented. A specialist in window repairs can take the handle from your window and open it without causing any further damage. They can also change obsolete window mechanisms into more modern mechanisms. Over time, the hinges on windows can become stiffer and more difficult to open, especially when the area is noisy. To avoid this happening it's recommended to lubricate the hinges on a regular basis using silicone spray. Be careful not to close the window using the handles or by closing it with a lot of force. This could damage the hinges. Broken Sash This is a typical issue for older double-glazed windows. If the upper sash has fallen out of its pocket, it may be hard to lock it and then open the window. This is usually because the pins have been disengaged or a balance shoe is been disconnected. It is important to know how your sash is configured before you attempt to repair it. The best solution to this is to remove the sash, and then clean it thoroughly. This will reveal whether it's still a good fit. If not, you can add stoppers for sash to keep it in place. They are available at the majority of hardware stores or on the internet. After cleaning the sash you can replace the parting bead and lubricate the pulley axles by using Teflon or silicon spray. Label the weights before removing them so that you can put them back in them correctly. A broken handle is a frequent issue. Window handles aren't easy to identify However, there are telltale signs that the handle you have is broken. If the handle is difficult to use or feels clunky or does not feel as if it's securely attached to the frame, then it's broken. It could be due to lack of use, or the handle may have been damaged or broken. In some instances, the handle might be damaged inside and cannot be replaced however it's still worthwhile to try fixing it as soon as you notice the issue. It may be necessary to take off the hinges that hold the window sash to the frame to remove it. This is a difficult job, so it's crucial to have someone to hold the sash in place and ensure it is steady. After you have removed the hinges, it is important to wash the surrounding area. You should also try to reconnect the hinges and then test the handle to be sure it's functioning properly. If not, then you may want to consider replacing it. This will ensure that your window is as secure as possible. Broken Handle It's not uncommon for the window handle to break or deteriorate over time. It is therefore essential that broken handles are repaired as fast as possible to avoid a inability to function and security issues. Fortunately, a window handle is quite simple to replace. The window handle can be easily replaced by anyone with some DIY skills. In contrast to the sash, which is secured using multiple bolts, a window handle only requires two screws. It's important to test the handle after it's been installed to make sure that it functions correctly. This includes locking the handle and searching for any gaps that could allow drafts to be able to enter your home, or allow burglars to gain access. A common reason for a broken window handle is that it's simply worn down by repeated use. However, excessive stress or force can result in broken handles. If you force the window to open, it can put additional strain on the handle. This increases the likelihood of injury. Other reasons for a broken hand include inadequate maintenance, aging or design issues. Inadequate cleaning and lubrication can cause the handle to wear down prematurely, and this is usually due to dirt or other debris that accumulates over time. The handle may also be damaged due to improper installation or alignment issues. If the fixes previously mentioned aren't successful and the tasker isn't able to solve the issue, the Tasker may need to gain access to and take out the lock mechanism itself. This could mean removal of the window frame, or breaking out the plastic bead and frame (to make room). A new lock can be installed that is a similar profile to the current uPVC handle. The new handle will be re-attached and the procedure is complete. If this is the case, the Tasker will offer a quote for repair costs. A faulty Lock If window locks are damaged, it's crucial to have the problem fixed immediately. This is because a damaged window could cause draughts and weaken home security barriers, making the property vulnerable to burglary. Window lock repairs are usually minor, but it is better to call a professional before the problem gets worse and costs you more money. UPVC window handles come in two different styles including cockspur handles as well as espagnolette handles. The first uses a central rod to operate the locking cams, which are shaped like mushrooms, that lock into window frame keepers. The lock's mushroom cams are activated by a handle attached to spindles. The latch of the lock clips into the mortise and is able to catch a window frame. Both types of UPVC window locks are susceptible to deterioration, particularly in older homes. This can happen if the sash is warped or misaligned, or even becomes loose. In these cases, the lock must be replaced in order to prevent draughts or loss of energy efficiency. Tasker can replace the damaged lock for you, leaving you with assurance that your windows are secure from burglars. The first thing that a Tasker will do to fix your double glazing window lock is examine it and identify the problem. Once they have all the information they need, they will get their tools set and then arrive at your home. They'll usually bring a Phillips head screwdriver, needle nose pliers, wood glue and fine-grit papers. If the sash has been misaligned, the Tasker will need to loosen the screws securing both pieces of the lock to the window frame. They'll then take the latch off and fill the mounting holes with wood putty (if appropriate) and sand the area until it's level with the rest of the window frame. If the lock has rusted the lock is cleaned using an oil or wire brush. The lock will then be lubricated with grease to ensure that it operates smoothly. They will also check the condition of the latch before reinstalling it.
double glazing window repairs
